Thursday, September 28, 2023
HomeBlogDrilling Options for Underground Irrigation Systems

Drilling Options for Underground Irrigation Systems

If you are looking for ways to conserve water and save money on irrigation, then underground irrigation sprinklers are the best option for you. However, installing an underground irrigation system can be complicated, given your lawn size and space. But with the help of proper material, preparations, and professional assistance, you can achieve your goal seamlessly and easily. 

Depending on their size and the location of water sources, parks, sports fields, landscaped gardens, farms, and other green spaces will eventually need underground irrigation systems. Although rain can benefit plants and grass in specific locations, you can’t always count on it. So you should always make sure there is a steady supply of water.

In this post, we have compiled a list of well-drilling irrigation system options that can help you create an underground irrigation water storage tank and complete system. 

Manual Digging

Although not recommended, manually digging a trench is possible for small-scale irrigation well drilling tasks like installing pipes for your lawn’s underground watering system. A digging spade is best for digging trenches in tight locations, whereas the typical square-edged garden spade is used for most tasks.

Trencher Digging

You can rent a chain-type trencher to save a tonne of time and energy if you wish to avoid labour-intensive digging for irrigation well drilling. With the help of this device, you may effortlessly and rapidly dig trenches that are suitable for use. However, when there are numerous tree roots or probable underground utility lines, or when you wish to preserve the area’s aesthetic appeal, this open-cut method of underground water storage for tanks is not the best option.

Horizontal directional drilling (boring)

Since they don’t harm subsurface utilities and infrastructure, the service offered by horizontal directional drilling contractors is regarded as non-destructive excavation. Directional boring entails digging horizontally underground along a pre-planned bore path, avoiding any existing obstructions. After the drill-out is finished, the pipe can be reinserted into the hole.

Hydro excavation

The hydro vac and hydro excavation services are also provided by some directional boring contractors. This technique is also a non-destructive excavation technique that often just excavates the dirt close to power lines and established tree roots. 

A high-pressure water jet stream is used in hydro excavation to remove the mud slurry after pushing the soil beneath the surface. This procedure works perfectly when the location contains numerous mature trees or is near tree root zones. This may be a time-consuming and expensive process, but it may be necessary when it’s necessary to remove water, mud, slurry, or sludge.

Excavators And Backhoes

These tools can also be used to dig your trenches, but due to their size and necessitated paths, they may disturb or even ruin some of the surrounding terrains. Large clumps of the excavated ground can also be found, making them unsuitable for backfill.

Mole Ploughing Machine

This underground irrigation supplies are comparable to a chain-type trencher, but instead of digging a permanent trench, it creates a temporary slit or trench by attaching a plough blade and then drops the pipe or conduit into the ground through a chute behind the blade. The method is ideal for grassy sports fields and parks because it moves much more quickly and leaves no obvious signs of activity.


Most Popular

Hot News