Floors take the most burnt in different types of industrial facilities, so it needs to be constructed considering load, usage and functionality to add durability. The selection of the right design, execution and product, therefore, becomes pivotal.

A bonding agent needs to be applied onto the existing concrete first to ensure that the fresh concrete will successfully adhere. Whether mixing the agent with a slurry or using an agent to bond two concrete surfaces together, a high-quality product can get the job done. It is applied over the existing surface of the concrete so that the new layer of fresh concrete successfully adheres to the old layer.

Avcon performance products cater to these sound technical flooring solutions that balance the requirement of compliance & functionality of industrial flooring. We provide solutions to projects of every size and scale, with our wide range of products. Avcon is India’s first flooring company with ISO 9001-2015 certification in Concrete Floor Design, Manufacturing of Products and Projects Executions.

A floor screed is usually a cementitious material made from cement and sharp sand, sometimes coarse aggregates can be added to create a thicker layer. It can be applied before final floor coverings to withstand the impact of constant use and heavy footfall. This protects the floor to make it last longer and provides an even, level surface. It is also highly insulating, which is why it is often used for underfloor heating systems.

Industrial flooring and Rigid Pavements (within factory premises) takes the burn of daily barrage of stressors like heavy equipment, forklift and foot traffic, chemical and oil spills, harsh cleaning regimens, etc. and continuous vehicle movement. These factors lead to damage to floors and pavements in the form of potholes that often start small but turn big in no time.

Decorative concrete flooring systems have evolved over the years which offered aesthetically better and durable solutions. With its’ speciality of cast-in-situ process with possibility of breaking monotony of designs, has allowed concrete decorative floors to offer endless variety of colours and textures. Along with its aesthetic appeal, decorative concrete floorings increase the strength, durability, and longevity of concrete surfaces.

Drying shrinkage in the warehouse floors are caused due to change in moisture of the concrete during the drying process. When water starts evaporating from the exposed surface the moisture differential along the floor slab causes strain which induces flooring stresses It causes cracking, wide joints and curling of concrete floors. To avoid this a balance between the product, design mix and drying process is needed to produce durable and crack-resistant industrial concrete floors.

Avcon Technics, with its almost three decades of experience in Design and Engineered Concrete flooring, has started its Resine’ Division to extend similar Solution Based Resin Systems for the benefit of Industry. It is useful in commercial and industrial facilities such as Cold Storage, Automotive factories, Manufacturing plants, Food and beverage facilities, Pharmaceutical plants, Parking decks etc.

Timely identification of concrete floor cracks and adopting preventive measures are essential. Right methods and products for the repair of the floor can be used upon the evaluation and causes of the cracks in the floor. AVCON Technics offers a wide range of products for concrete floor repair products to suit your repair requirement.

The polished screed’s primary purpose is to give a smooth and level floor on which to lay your chosen floor finish. A polished screed can create your desired finish without the need to replace your entire substrate. It can be undertaken in the colour and finish of your choice, with an almost endless colour palette and both matte and high gloss options available.

Avcon industrial flooring products cater to these sound technical flooring solutions that balance the requirement of compliance & functionality of industrial flooring. They provide solutions to projects of every size and scale, with their wide range of products. Avcon is India’s first flooring company with ISO 9001-2015 certification in Concrete Floor Design, Manufacturing of Products and Projects Executions.

Avcon Technics Pvt. Ltd. (Avcon) provides turn-key Design & Engineered Concrete Flooring Solutions across sectors. The company has a proven track record of providing technical flooring solutions that balance the requirement of compliance of light to heavy industries.

Resin flooring provides durable and seamless floor surfaces for different types of commercial and industrial applications. This type of flooring makes use of a mixture of materials, which is applied in its liquid form, which then hardens over time to form a sturdy floor that can accommodate high volumes of foot and vehicle traffic.