Are you worried because the garage door keypad is not working? There can be multiple explanations for this. You may need to replace the batteries or clean the keypad. You may also need to troubleshoot the keypad to find the best solution.
What are the possible causes of keyword malfunctioning?
Your garage door keypad must be relied upon when you do not have a remote. So, always ensure the garage door opener stays in smooth working condition. It will undoubtedly benefit the function and schedule of the garage door. Let’s discuss some of the common reasons for the malfunctioning of your garage door keypad.
• Stuck keys
• Dead keypad batteries
• PIN issues
• Malfunctioning codes
• Damaged wires
• Worn-out and old keypads
Ways to reset the keypad of your garage door
If the keypad of your commercial garage door is not working correctly, you can try multiple things. However, specific solutions are more intricate than others.
· Keypad cleaning
A thorough cleaning can help your keypad last long. To avoid debris and oil, you can regularly clean the keypad from the outside using rubbing alcohol or an alcohol-based cleaning solution. Also, remove the dirt and grime in between the buttons.
If you use a remote control, wiping the outside portion with a cleaner is advised. Then, open up the remote and remove debris and dust using a soft brush, even before removing the pad from the remote. Before replacing the pad again, clean the inner area beside the keys. Finally, replace the garage remote.
· Keypad replacement
Replacing the whole keypad is the best way to reset the garage door keypad without any code. Although a casing is provided to protect the keypad, it’s still vulnerable to damage and harsh elements. At times, it’s always the best option to replace it entirely.
· Battery replacement
When the garage keypad stops working, check the batteries. It’s common to forget to replace them. A 12-volt or 9-volt battery works best for most keypad models. After replacing the battery, you need to reprogram the garage keypad.
· Frayed wiring
If your keypad is no longer working, look out for frayed wiring. In the initiative, you must detach each loose wire and reattach it to the relevant keys. You can work on one wire at a time to avoid mixing up. Ensure the attachments are properly secured, and put the keypad back in place.
· System reboot
A reboot can quickly fix the keypad of your garage door when you have tried almost every possible solution, and nothing works. This helps clear the door system’s memory and allows for resetting. Switch off the opener and then unplug the system. After 5 minutes, you should plug it again. Now, restart step by step and see how it makes a difference.
· Surface interference
Commercial overhead doors keypads are usually mounted on a metal surface, sometimes interfering with the wireless system’s function. You can try unmounting the keypad and entering the password again. If it works, insert a plastic or wooden buffer between the device and the mounting surface.
Summing it up:
If nothing works, contact the expert and ask them to fix the garage door keypad so that you no longer face any issues in opening and closing the door. What are you waiting for?
